PLEASE NOTE: FOR YOUR PRINTER TO FUNCTION, IT IS MANDATORY THAT YOUR UNIT BE LOCATED IN AN AREA THAT MATCHES THE FOLLOWING ENVIRONMENTAL PARAMETERS
No Powder CobraFlex Printer
Your printer must be in a climate-controlled environment at all times. Both printer inks and adhesives are sensitive to both heat and cold.
Your printer's environment must not be:
- Too Hot-If a printer is too hot, you run the risk of overheating your printer's power supply, headboard, main board headboards, and print heads as well as causing the ink to discolor or not adhere properly.
- Too Cold- If it's too cold, inks have trouble flowing which invariably causes clogs.
- Too Dirty or Too Dusty- Your printer can not work properly in a dirty or dusty environment. Your printer uses a fan to cool itself. These fans can suck dust into the motors which can cause your printer's encoder strip to have issues, or even to fail.
Your printer must have the following environment:
It must be in a climate-controlled environment at all times. Printer room temperature should be between 60°F minimum-80°F maximum.
Humidity levels must be between 35%-65%- Our printers operate best at 40% minimum to 60% maximum.
An air pneumatic heat press must be installed with at least 110 psi to 150 psi.
Powder CobraFlex Printer
Your printer must be in a climate-controlled environment at all times. Both printer inks and adhesives are sensitive to both heat and cold.
Your printer's environment must not be:
- Too Hot-If a printer is too hot, you run the risk of overheating your printer's power supply, headboard, main board headboards, and print heads as well as causing the ink to discolor or not adhere properly.
- Too Cold- If it's too cold, inks have trouble flowing which invariably causes clogs.
- Too Dirty or Too Dusty- Your printer can not work properly in a dirty or dusty environment. Your printer uses a fan to cool itself. These fans can suck dust into the motors which can cause your printer's encoder strip to have issues, or even to fail.
Your printer must have the following environment:
It must be in a climate-controlled environment at all times. Printer room temperature should be between 60°F minimum-80°F maximum.
Humidity levels must be between 35%-65%- Our powder printers operate best at 40% minimum to 50% maximum.
An air pneumatic heat press must be installed with at least 140 psi to 75 psi.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article