Head Replacement

Created by service Department, Modified on Mon, 15 Apr at 10:06 AM by service Department

Here are (3) videos that go over how to replace a new head.

Be sure you take photo's of the top ribbon cable plug-in area's where the ribbons are plugged in, This will help you to re-plug back in the ribbon cables properly when you

re-attach the new head.

Please watch all 3 videos, as they are staged to walk through each step in the process.

Also be sure that you have rags on hand when removing the dampeners from the old

head. Get a rag ready and remove the 4 dampeners from the top of the old head and

wrap a rag around them to secure any ink leaking out.

Then cover each of the other heads with rags as well. This helps to protect the other heads from any random ink dropping out in the process of removing the old head.

Be sure to use new ribbon cables when replacing a new head.

Gen 1-2 Head Replacement Video 1:
https://drive.google.com/file/d/1--S1J6LLJQLlsqpf0xIrI61vNJvZ3y1z/view?usp=sharing

Gen 1-2 Head Replacement Video 2:
https://drive.google.com/file/d/1-39TxaF_02sOBYC6zB7yg_O8ZT19APVD/view?usp=sharing

Gen 1-2 Head Replacement Video 3:
https://drive.google.com/file/d/1-3UPEdbFmgNqSD38ToCaB-kzSgJEYJVB/view?usp=sharing